Daf oily water separator wastewater disposal machine
Description:
YW series Dissolved Air Flotation is mainly for solid-liquid or liquid-liquid separation. Large sum of micro bubbles produced by dissolving and releasing system adhere to solid or liquid particles with same density as waste water to make the whole float to the surface thus achieve the aim of solid-liquid or liquid-liquid separation.
Technical Parameter:
Model |
Capacity(m³/h) |
Dissolved Gas water(m³/h) |
Main dynamo power(KW) |
Foam scraper power(KW) |
Air compressor power(KW) |
Dissolved air tank size(mm) |
Overall dimension(mm) |
YW-5 |
4-5 |
1.5-2 |
3 |
0.55 |
1.5 |
φ400×1000 |
3300×1800×2000 |
YW-10 |
8-10 |
2-3 |
4 |
0.55 |
1.5 |
φ500×1512 |
4000×2100×2200 |
YW-20 |
15-20 |
5-7 |
7.5 |
0.55 |
1.5 |
φ500×1512 |
4600×2400×2200 |
YW-30 |
20-30 |
6-10 |
7.5 |
0.55 |
1.5 |
φ500×1512 |
5200×2600×2400 |
YW-40 |
30-40 |
8-13 |
7.5 |
0.75 |
2.2 |
φ600×1880 |
6000×2600×2400 |
YW-50 |
40-50 |
15-20 |
7.5 |
0.75 |
2.2 |
φ600×1880 |
7000×2600×2400 |
YW-60 |
50-60 |
18-27 |
11 |
0.75 |
2.2 |
φ600×1880 |
7600×2800×2400 |
YW-70 |
60-70 |
22-30 |
11 |
0.75 |
2.2 |
φ650×2034 |
8400×2800×2400 |
YW-80 |
70-80 |
24-32 |
11 |
0.75 |
3 |
φ650×2034 |
9200×2800×2400 |
YW-105 |
90-105 |
30-35 |
15 |
1.5 |
3 |
φ700×1980 |
10000×2800×2600 |
YW-150 |
125-150 |
60-80 |
22 |
1.1 |
4 |
φ700×1980 |
13500×2800×2600 |
YW-200 |
175-200 |
80-100 |
30 |
1.1 |
5.5 |
φ800×2100 |
15800×2800×2600 |
YW-250 |
225-250 |
100-120 |
37 |
1.1 |
5.5 |
φ800×2400 |
15200×3400×2600 |
YW-300 |
280-300 |
120-180 |
37 |
1.1 |
5.5 |
φ1000×2900 |
19200×3400×2800 |
Structure:
YW Dissolved Air system is composed of Air Dissolving System(dissolved air pump,air compressor ,dossolved air tank, releaser etc.),air flotation tank, scraping system(foam scraper reducer, chain,scraping board etc).
Product Performance:
1.The DAF machine relies on a large number of micro-bubbles to remove the flocculation of the adhesion reaction,so the flocculayion requirements are not high ,which can reduce the flocculation time and save the flocculation agent.
2.High yield per unit area,small pool capacity and floor area,saving land and cost.
3.Convenient sludge discharge ,low water consumption;low moisture content of sludge.
4.Shallow tank body depth ,simple tank structure .The machine can be opened and stopped at any time according to the situation and the actual needs,without affecting the water quality ,easy operation and maintenance.
Applications:
1.Separation of oily(including emulsified) wastewater from petroleum, chemical and mechanical processes.
2.Recovery of sewage organic matter.(such as recovery of pulp fibers and fillers from paper mill wastewater).
3.Treatment of wastewater with high chroma and low dissolved oxygen.Such as textile printing and dyeing wastewater treatment .
4.Treatment of oxide-rich wastewater containing algae.
5.Treatment of low temperature and low turbidity sewage.
6.Replace secondary sedimentation tank, suitable for the situation that is easy to produce sludge swelling;It is suitable for the concentration of residual activated sludge and convenient for the treatment of filter press.
Instructions:
1.Punning foundation before installation .Block up 100-150mm with concrete mortar or choose overhead installation ,make sure the foundation can bear the weight of the equipment in operation.
2.The horizontal should be adjusted when the equipment is in position.
3.Sewer is needed for the discharge of water in cleaning air floating pond.Open channel or pipeline connected to the regulating reservoir is ok.
4.The pipeline which links sewage entrance and reaction tank should be short (the shorter,the better) in order to avoid the damage of flocculants.
5.The clean water entrance can be connected with sewer ,or be connected with the next treatment equipment if necessary.
6.Sludge exit can be connected with sludge tank or sludge treatment equipment.
7.Electrical cabinet should be placed around the staircase,keep the environment clean.
Transport Package:
Company Introduction:
FAQ:
1.Q:Are you a factory or trading company?
A:We are a factory ,we have rich experience for manufacuring water processing equipment for more than 10 years.
2.Q:Where is your factory located? How can I visit there?
A:Our factory is located in No.1137,Zhucheng city ,Shandong Province, China .It is about 2 hours from Qingdao airport, Qingdao train station and Wei fang train station. We can pick you up if you need ,welcome to visit our factory.
3.Q:Do you have minimum order quantity request?
A:No minimum order, but it can get a discount if you order a large quantity.
4.Q:Do you have certificates?
A:Yes,we have ISO,SGS certificate.
5.Q:Can you meet my special require mwnts for my products?
A:Yes,we have a professional design team.We can provide drawings according to your requirements.
6.Q:How to buy your idea products?
A:You can provide us your water or waste sources,water or waste quality,flow rate and ground area (connect us for more details) .
7.Q:How to pay?
A:T/T and L/C are acceptable and T/T will be more appreciated 30% deposit before producing,70% balance before loading by T/T.
8.Q:What is the delivery time ?
A: It depends on order quantitles .Generally speaking ,the delivery time will be within 4 to 6 weeks.
9.Q:How to pack the products?
A:We use standard package .If you have special package requirements ,we will pack as required ,but the fees will be paid by customers.
10.Q:How to keep your equipments from corrosion?
A:We use the world-famous paint ,like Sigma Coatings ,Pain ,Bow, etc. What's more ,we paint strictly according to the standard process.
11.Q:How do you manufacture your equipment?
A:Our machining technology includes laser 1 plasma cutting ,automatic welding, CNC cutting and bending.
12.Q:How to install after the equipments arriving destination?
A:We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee ,air tickets ,accommodation, wages will be paid by buyers.