Product Description
1.MBR OVERVIEW
Membrane Bioreactor (MBR) is realized the efficient combination of membrane separation technology with biological technology.
The membrane separation technology replaces the traditional active sludge method and the normal filter device.
Its strong separation ability can make the SS turbidity near to be zero.
2. MAIN FEATURES
1)The membrane separation process of the advanced membrane bioreactor method takes the place of the traditional biological treatment, gravity settling process, thus ,make the effect better, the effluent is more stable, can be reused directly.
2)Simple technological process. The membrane bio-react tank displaces the traditional contact oxidation tank, sedimentation tank, middle tank. The process is easy to control. The membrane bioreactor adopts the integrated design, it has a compact structure, small floor occupation and high automaticity.
3)Hardly need sludge discharge. Because the device can work with the sludge concentration above 10g/l, COD can be thoroughly biodegraded in the MBR tank which is with high sludge concentration. Therefore, there is little excess sludge.
4)The machine can realize automatic intermittent operation. The system pumps and valves can start and open as the designed procedure automatically. It is equipped with automatic level control, membrane pollution control and failure warning control for easy observation.
5)The device is suitable for residential district, multifunctional building, hotels, restaurants, apartment, bath center, etc, esp. the domestic sewage. The water being treated can be reused as flushing water, greening water, landscape water and undrinkable water.
3.MBR APPLICATION
1) Residence communities, offices, commercial buildings,
2) Hotels, restaurants, schools, hospitals
3) High ways, railways, factories etc.
4) Industries related with slaughter, textile, beer, paper mill, leather, food, chemicals
4.TECHNICAL PARAMETER
Project |
Inlet water quality |
Outlet water quality |
BOD5(mg/L) |
≤600-1300 |
≤5-50 |
COD (mg/L) |
≤400-6000 |
≤30-60 |
NH3-N(mg/L) |
≤10-35 |
≤5(8) |
SS(mg/L) |
≤150-1300 |
≤10-50 |
PH |
|
6.5-8.5
|
Outlet can reach strictest requirement based on your local standards, plz kindly contact us for more info.
5.FLOW CHAR
MBR is a kind of new technology for waste water treatment by combining membrane separation technique with activated sludge method.
It can be used for municipal sewage and industrial waste water treatment and substitute for secondary sedimentation tank inremoving suspended particles, so as to increase nitrogen removal rate and organics degradation rate.
Technological Process:
Sewage → Grille → Regulating pond → MBR Bioreactor → Discharge(reuse)
PACKAGING AND TRANSPORTATION
CUSTOMER PHOTOS
COMPANY INTRODUCTION
ABOUT US
Shandong Better company was established 15 years ago,our products have been obtained the ISO 9001.
Cooperated with UNDP, Ministry of Health, and many govenment Projects.
TECHNICAL SUPPORT
1). English manual book
2). Technical drawing
3). Experienced engineers guide
Fully(100%) manufactured in the factory
No need secondory welding
WHY CHOOSE US
1. We consistent good quality with reasonable price.
2. Big company, good reputation, more reliable.
3. Delivery in time.
4. Over 15 years' experience since 1991.
5.Considerable after-sales service
FAQ
1.Q:Are you a factory or trading company?
A: We are a direct factory, we have rich experiences for manufacturing waste treatment plants for more than 15 years.
2.Q:Where is your factory ? How can i visit there?
A: Our factory is located in No.1137, Zhucheng city, Shandong Province, China. It is about 2 hours from Qingdao airport. We can pick you up if you need, welcome to visit our factory.
3.Q: Do you have minimum order quantity request?
A: No minimum order, but it can get a discount if you order a large quantity.
4.Q: Do you have certificates?
A: Yes, we have ISO,SGS certificate.
5.Q: Can you meet my special requirements for my products?
A: Yes, we have a professional design team. Drawings can be provided according to your requirements.
6. Q:How do I buy your products?
A:You can provide us your water sources, water quality, flow rate and ground area (contact us for more details).
7. Q:How do I pay?
A: TT and L/C are acceptable and TT will be more appreciated. 30% paid for deposit by T/T before production, 70% balance to be paid by TT before shipment.
8. Q:What is the delivery time?
A: It would largely depend on the quantity of order and the item you want.. Generally speaking, the delivery time will be within 4 to 6 weeks.
9. Q: How do you pack the products?
A: We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.
10. Q: How do you keep your equipment from corrosion?
A: We use the world-famous paint, like SigmaCoatings, PainBow,etc. What's more, we paint strictly according to the standard process.
11. Q: How do you manufacture your equipment ?
A:Our machining technology includes laser/plasma cutting, automatic welding,CNC cutting and bending.
12. Q:How do we install after the equipment arriving destination?
A: Detailed installation drawing can be provided for you. If it is necessary, we will send technicians to help you. However, the visa fee, air tickets, accommodation, wages will be paid by buyers
Audited Supplier 
){kind=link}
){kind=link}