One step solution from design, produce, installation, commissioning. Dissolved air flotation (DAF) is one of the most important and effective process in the treatment of all types of water -industrial and urban wastewater treatment, water processing and water reuse of processes.
1.Dissolved air flotation is based on a Physics-chemical process which separates solid-liquid particles by the addition of very small air bubbles.These bubbles stick on solid particles and give them a high rate of ascent.Once in the surface, the solids and sludge are pulled mechanically to the hopper. 2.Finally, in the surface of the flotation unit a scraper system pulls the generated sludge to the hopper for collecting it and the clarified water is discharged in a spillway on the opposite side. 3.In the meanwhile, heavier particles that could not reach a lower density than water are kept in the sedimentation chamber to be recirculated at the beginning of the water treatment line to receive the appropriate treatment.
Dissolved air flotation gives a rate of ascent 5 times higher than settling speed in a conventional settling tank, thereby saving time and space.
Specification
Capacity (m3/h)
Dissolved gas water
(m3/h)
Main dynamo power (kw)
Foam scraper power(kw)
Air compressor power(kw)
Dissolved air tank size
(mm)
YW-5
4-5
1.5-2
3
0.37
1.5
Φ400x1000
YW-10
8-10
2-3
3
0.37
1.5
Φ500x1512
YW-20
15-20
5-7
7.5
0.37
1.5
Φ500x1512
YW-30
20-30
6-10
7.5
0.37
1.5
Φ500x1512
YW-40
30-40
8-13
7.5
0.55
1.5
Φ600x1880
YW-50
40-50
15-20
7.5
0.55
1.5
Φ600x1880
YW-60
50-60
18-27
7.5
0.55
1.5
Φ600x1880
YW-80
70-80
24-32
7.5
0.55
1.5
Φ650x2034
YW-100
90-100
30-35
15
0.55
3
Φ700x1980
YW-150
125-150
60-80
22
1.1
3
Φ800x1980
YW-200
175-200
80-100
22
1.1
3
Φ800x2100
YW-250
225-250
110-120
22
1.1
3
Φ800x2400
YW-300
280-300
120-180
37
1.1
5.5
Φ1000x2900
It can be installed in different points of water treatment line due to multiple design possibilities of dissolved air flotation units. 1.In several occasions, dissolved air flotation system is installed at the beginning of the water treatment process, immediately after the pretreatment to remove fat and grease.,,. 2.It also can be implanted at the inlet of biological treatment for reducing pollutant load.In other many times it is placed at the final of water treatment line to clarify water before being discharged. 3.In desalination -in which the development of fiber glass is starting to consolidate as construction material- it works to protect the membranes from the presence of algae in the water too. 4.Furthermore it can be installed at the top of the sludge treatment line as sludge thickener to reduce the volume. Company Introduction 13 years of Experience With decades of knowledge in this sector, our equipment are designed to cater for the specialized requirements of sewage and smaller waste water treatment during the internal waste management processes.. Why choose a Dissolved Air Flotation Machine from our company? we have provided solutions to Factory and municipal sewage around the globe for years - because our experience and skills in this sector are second to none. BETTER manufactures DAF for a number of different industries, and we specialize in designing reliable equipment for the hospital, food, energy and marine industries. Our trained engineers have many years of experience, thus we are able to offer custom-made DAF for a wide variety of sectors with very different needs.
){kind=link}