Product Description
It can effectively remove BOD5, COD and NH3-N. The device is characterized by the stable performance, effective treatment, economical investment, automatic operation, convenience of maintenance and small occupying space. There is no need for construction, neither heating and heat preservation. The surface can be used as green land or square land. It also can be placed on ground based on client's requirement. As the most efficient sewage treatment equipment, it is widely used in treating the sewage in the area of apartments, school, hospital, railway sevice area, hotels, village districts, community and residential districts, etc. The water after treatment would meet the national emission standards. The water after be treated can be used to irrigation or directly discharge to river or municipal sewage pipe.
2. Product application
(1) Appartment, Hotel, restaurant, sanatorium, hospital, school sewage treatment;
(2) Residence community, villa district, city, village, town sewage treatment;
(3) Station, airport, seaport and dock sewage treatment;
(4) Factory, mine, army, beauty spot sewage treatment;
(5) All kinds of industrial sewage similar to the domestic household sewage treament, etc.
3.Main Features
(1)Domestic waste water treatment plant can be buried below the earth's surface. The surface can be used as green land or square land. Therefore, the device covers no surface area. And there is no need for plant construction, neither heating and heat preservation.
(2)Domestic waste water treatment plant use plug flow biological contact oxidation pond, the effect is better. Besides, it is smaller than active sludge pool. The applicability to the water is stronger, impact resistance performance is good, discharging water is stable, there is no sludge expansion. In addition, the new elastomeric stereoscopic materials in the oxidation pond have a higher removing rate, and also can improve the water solubility of oxygen
(3)Because of the low volume load of fillings in AO bio-treatment technology of the device, and microbes are in the stage of oxygen, it would produce less mud. Generally only 90 days for one sludge removal.
(4) Except for the conventional air exhaust, the device is equipped with soil deodorization measure as well.
(5)Domestic waste water treatment plant is equipped with fully automatic electric control system and equipment damage alarm system. The device has a good reliability, generally, there is no need for special management, a monthly or quarterlt maintenance is ok.
4.Technical parameter
| Model |
0.5 |
1 |
3 |
5 |
10 |
20 |
30 |
| Capacity (m3/h) |
0.5 |
1 |
3 |
5 |
10 |
20 |
30 |
| Air blower |
Model |
HB-0.75 |
HB-1.1 |
HB-1.2 |
HB-4.4 |
HB-8.8 |
HB-11.5 |
| Power |
0.75 |
1.1 |
1.2 |
4.4 |
4.4*2 |
11.5 |
| Pump |
Model |
40QW-10-0.75 |
40QW-10-7-0.75 |
50QW10-10-1.1 |
50QW25-7-1.5 |
50QW25-7-1.5 |
50QW42-9-2.2 |
| Power |
0.75-1.1 |
1.5 |
2.2 |
| Inlet water |
BOD5
mg/L |
150-400 |
| Outlet water |
BOD5
mg/L |
20-60 |
| Floor space |
4.5 |
6.5 |
12 |
15 |
35 |
51 |
76 |
FAQ
1.Q:Are you a factory or trading company
A: We are a factory, we have rich experience for manufacuring water processing equipment for more than 10 years.
2.Q:Where is your factory located? How can i visit there?
A: Our factory is located in No.1137 Guanhai road , Zhucheng City, Shandong Province, China. It is about 2 hours from qingdao airport. We can pick you up if you need, welcome to visit our factory.
3.Q: Do you have minimum order quantity request?
A: No minimum order, but it can get a discount if you order a large quantity.
4.Q: Do you have certificates?
A: Yes, we have ISO,SGS certificate.
5.Q: Can you meet my special requirements for my products?
A: Yes, we have a professional design team. We can provide drawings according to your requirements.
6. Q:How to buy your idea products?
A:You can provide us your water sources, water quality, flow rate and ground area (connect us for more details).
7. Q:How to pay?
A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT.
8. Q:What is the delivery time?
A: It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.
9. Q: How to pack the products?
A: We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.
10. Q: How to keep your equipments from corrosion?
A: We use the world-famous paint, like SigmaCoatings,PainBow,etc. What's more, we paint strictly according to the standard process.
11. Q: How do you manufacture your equipment ?
A:Our machining technology includes laser/plasma cutting, automatic welding,CNC cutting and bending.
12. Q:How to install after the equipments arriving destination?
A: We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee, air tickets, accommodation, wages will be paid by buyers.
){kind=link}