WSZ is a kind of new equipment for waste water treatment by combining membrane separation technique with activated sludge method. It can be used for municipal sewage and industrial waste water treatment .
It also can be substitute for secondary sedimentation tank in removing suspended particles, so as to increase nitrogen removal rate and organics degradation.
Technology features:
- Adopting modified A/O process, combining the advantages of activated sludge and bio-film technologies.
- Based on innovative high efficiency patented biological wastewater treating technology, the treating process is energy-saving.
- The fixed plate biofilm carrier inside can effectively enhance nitrogen removal performance.
- Achieving remote monitor and control through environmental intelligent Control panel.
- capacity of single module: 20-450t/d.
- Population coverage of single module: 150-1000 persons.
- Occupation area: 0.20-0.45 m2/t.
- Energy consumption: 0.20-0.50 KW.h/t.
Application areas:
- Domestic wastewater from distributed population such as rural areas, tourist resorts, residential areas around highways, schools, hospitals, hotels, independent industrial and mining areas etc.
- Small amount industry wastewater which is relatively easy to treat such as sewage from hospital, pharmaceutical factory, etc.
Based on obove waste water characteristice, the plant is designed to achieve the following outlet standard.
| Item |
Inlet water quality(mg/l) |
Outlet water standard(mg/l) |
| COD |
<2380 - 8942 |
<20-60 |
| BOD |
<600-850 |
<50 |
| TDS |
<180 - 3330 |
<250 |
| O&G |
215 |
<10 |
| PH |
|
6.5-8.5 |
Outlet can reach strictest requirement based on your local standards, plz kindly contact us for more info.
| Membrane Area |
6 m2 |
10 m2 |
| Height |
1050 mm |
1550 mm |
| Width |
645 mm |
645 mm |
| Weight |
4 kg |
6 kg |
| Micropore Size |
0.05μm |
0.05μm |
| Inner diameter |
Φ1.0 mm |
Φ1.0 mm |
| Outside Diameter |
Φ2.4 mm |
Φ2.4 mm |
| SS of the filtrated water |
≤ 1 mg/L |
≤ 1 mg/L |
| Temperature |
4-40ºC |
5-40ºC |
| PH |
2-13 |
2-13 |
| Operating Pressure |
-0.01 - -0.08MPa |
-0.01 - -0.08MPa |
Product Advantages:
- The treated water quality could meet the strict discharge standard for municipal wastewater treatment.
- Plug & play solution, easy installation.
- The treated water could be reused for irrigation, flushing, etc.
- Short construction period with standardized production and modular configuration;
- No secondary pollution production like surplus sludge, exhaust gas and noise;
- Stable performance, easy operation, easy maintenance.
- Strong impulsion load resistance with stable operation effect.
We also strongly recommend our dencentralized undergroud small waste water treatment plant, which is modular and can be added to treat more sewage volume according to your project.
Technical Support:
English manual book
Technical drawing
Experienced engineers guide
Product warranty: Usually, our product warranty is 18 months after leaving factory or 12 months after installation.
Installation: If the project needs our installation guidance, we can send our engineer and translator. The expenses shall be borne by the project owner.
We are more than happy to help you with any inquiry. Call us or send us an email, and we'll be ready to assist you.
- Q:Are you a factory or trading company?
A: We are a factory, we have rich experience for manufacturing water processing equipment for more than 13years.
2.Q:Where is your factory located? How can i visit there?
A: Our factory is located in No.1137, Zhucheng city, Shandong Province, China. It is about 2 hours from Qingdao airport. We can pick you up if you need, welcome to visit our factory.
3.Q: Do you have minimum order quantity request?
A: No minimum order, but it can get a discount if you order a large quantity.
4.Q: Do you have certificates?
A: Yes, we have ISO,SGS certificate.
5.Q: Can you meet my special requirements for my products?
A: Yes, we have a professional design team. We can provide drawings according to your requirements.
6. Q: How to buy your idea products?
A: You can provide us your water sources, water quality, flow rate and ground area (contact us for more details).
7. Q: How to pay?
A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT.
8. Q: What is the delivery time?
A: It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.
9. Q: How to pack the products?
A: We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.
10. Q: How to keep your equipment from corrosion?
A: We use the world-famous paint, like SigmaCoatings, PainBow,etc. What's more, we paint strictly according to the standard process.
11. Q: How do you manufacture your equipment?
A: Our machining technology includes laser/plasma cutting, automatic welding, CNC cutting and bending.
12. Q: How to install after the equipment arriving destination?
A: We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee, air tickets, accommodation, wages will be paid by buyers.
){kind=link}