MBR Intergrated Intelligent Wastewater Reuse Device,industrial sewage treatment equipment
MBR overview
Membrane Bioreactor,referred to as MBR water treatment technology.It is a high-efficiency biological wastewater technology that combines bio-technology and membrane technology.As the high-efficiency sewage treatment technology that combines membrane separation technology and biological membrane method,due to the filtration effect of the membrane,the organisms are completely trapped in the bioreactorm,realizing the complete separation of hydraulic retention time and SRT,and maintaining a high MLSS in the membrane tank,with strong nitrification ability and high pollutant removal rate.
Membrane bioreactor is a new type of wastewater treatment technology combining high-efficiency membrane separation technology and bio-membrane method.The application of hollow fiber membrane replaces the secondary sedimentation tank in the traditional process for solid-liquid separation,effectively achieving the purpose of mud-water separation.Make full use of the high-efficiency interception effect of the membrane,which can effectively intercept the niitrifying bacteria,completely retained in the bioreactor,ensure the smooth progress of the nitrification reaction,effectively remove the ammonia nitrogen,avoid the loss of sludge,and can intercept the macromolecular organic matter that is difficult to degrade,to extend its residence time in the reactor to maximize decomposition.After applying MBR technology,the removal rate of main pollutants can reach:COD≥93%,SS=100%.The suspended solids and turbidity of the eflluent are almost zero,the treated water quality is very good and stable,thus to achieve recycling of sewage.
MBR advantage
MBR device is an intergrated equipment that uses membrane bioreactor(MBR) for sewage treatment and reuse.It has all the advantage of membrane bioreactor:good outlet water quality,low operating cost,strong system impact resistance,low sludge amount and high degree of automation.In addition,as an integrated device,it has a small footprint and is easy to integrate.It can be used not only as a small-scale sewage recycling equipment,but also as a core treatment unit of a larger sewage treatment plant (station).It is one of the hotspots in the field of sewage treatment and has broad application prospects.
MBR application range
Suitable for residential sewage,office buildings,shopping malls,hotels,restaurants,institutions,schools,troops,factories and other domestic sewage and similar industrial organic wastewater,such as textile,beer,leather,food,chemical and other industriaes.
MBR technological characteristics
Membrane bioreactor,referred to as MBR water treatment technology.It is a high-efficiency biological wastewater treatment technology that combines bio-technology and membrane technology.As the high-efficiency sewage treatment technology that combines membrane separation technology and biological membrane method,due to the filtration effect of the membrane,the organisms are completely trapped in the bioreactor,realizing the complete separation of hydraulic retention time and SRT,and maintaining a high MLSS in the membrane tank,with strong nitrification ability and high pollutant removal rate.
Membrane bioreactor is a new type of wastewater treatment technology combining high-efficiency membrane separation technology and bio-membrane method.The application of hollow fiber membrane replaces the secondary sedimentation tank in the traditional process for solid-liquid separation,effectively achieving the purpose of mud-water separation.Make full use of the high-efficiency interception effect of the membrane,which can effectively intercept the nitrifying bacteria,completely retained in the bioreactor,ensure the smooth progress of the nitrification reaction,effectively remove the ammonia nitrogen,avoid the loss of sludge,and can intercept the macromolecular organic matter that is difficult to degrade,to extend its residence time in the reactor to maximize decomposition.After applying MBR technology, the removal rate of main pollutants can reach:COD≥93%,SS=100%.The suspended soilds and turbidity of the effluent are almost zero,the treated water quality is very good and stable,thus to achieve recycling of sewage.
MBR for domestic sewage treatment outlet water quality
| Category |
Raw water
quality(mg/l) |
Treated water
quality(mg/l) |
| BOD5(mg/l) |
150-250 |
<10 |
| COD(mg/l) |
200-400 |
<50 |
| SS(mg/l) |
150-250 |
<10 |
Ammonia
nitrogen(mg/l) |
10-35 |
5(8) |
Technological Process:
Sewage → Grille → Regulating pond → MBR Bioreactor → Discharge(reuse)
1. Temperature: 5ºC~45ºC, average membrane aperture 0.10 μm.
2. PH: 2~12, membrane thickness: 40μm.
3. Outlet water turbidity: <1 NTU , outlet water SS <1mg/L.
4. Membrane area: 8m2, advised gas-water ratio: 25:1~30:1.
5. Operating pressure: -0.01 ~ -0.03MPa.
FAQ
We always put the quality as the first consideration! If you need further information , feel free to contact Us! We are more than happy to help you with any inquiry. Call us or send us an email, and we'll be ready to assist you.
1.Q:Are you a factory or trading company?
A: We are a factory, we have rich experience for manufacturing water processing equipment for more than 10 years.
2.Q:Where is your factory located? How can i visit there?
A: Our factory is located in No.1137, Zhucheng city, Shandong Province, China. It is about 2 hours from Qingdao airport. We can pick you up if you need, welcome to visit our factory.
3.Q: Do you have minimum order quantity request?
A: No minimum order, but it can get a discount if you order a large quantity.
4.Q: Do you have certificates?
A: Yes, we have ISO,SGS certificate.
5.Q: Can you meet my special requirements for my products?
A: Yes, we have a professional design team. We can provide drawings according to your requirements.
6. Q: How to buy your idea products?
A: You can provide us your water sources, water quality, flow rate and ground area (contact us for more details).
7. Q: How to pay?
A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT.
8. Q: What is the delivery time?
A: It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.
9. Q: How to pack the products?
A: We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.
10. Q: How to keep your equipment from corrosion?
A: We use the world-famous paint, like SigmaCoatings, PainBow,etc. What's more, we paint strictly according to the standard process.
11. Q: How do you manufacture your equipment?
A: Our machining technology includes laser/plasma cutting, automatic welding, CNC cutting and bending.
12. Q: How to install after the equipment arriving destination?
A: We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee, air tickets, accommodation, wages will be paid by buyers.
Audited Supplier 
){kind=link}
){kind=link}