Mobile: +86 15954432797 WAP
+86 18563632049
1. Description
WFS Series Medical Waste Incinerator is a kind of machine that was developed on the basis of Japanese technology, absorbs advantages of similar equipment both at home and abroad. It features unique and advanced merits with compact size, high burning effect, reasonable burning technology, high degree of non-harm etc. It is an ideal choice for waste treatment of hospitals, hotels and various areas.
2. Main Features
(1) Gasified pyrolysis incineration is used for burning syringe, paper waste, bandage, absorbent cotton and other medical wastes etc.
(2) Waste can be burned once everyday by gasified incineration.
(3) Gasified incineration, mixed incineration and burnout treatment ensures low emission standard of dust, dioxin etc.
(4) Totally enclosed operation is suitable for treating infectious waste to avoid secondary pollution.
(5) Compact structure and small land occupation.
What the WFS series Waste Incinerator used is the most advanced burning down technology, that is first burning, second burning, and burn treatment. The design of incinerator's combustion chamber use the gasified burning down technology to move the temperature in incinerator stove from 200ºC to 400ºC. Due to this technology, there will no melt block, slag lump and sintering problems in the burning down process. Gasification and direct-fired incinerators have very little dust generated during the process, compared with other kinds of heaters and stoves. There are second burning equipment and circle-wind generator installed in the second burning combustion chamber. Under the high temperature, the flammable gas can fully burn, and also mix and burn the gas generated in gasifier with the air under high efficiency, prevented the carbon material's transgression and late burn phenomena. Because of the combustion ways like tangential entering of gas and air are used, the gas can reburn fully in the combustion chamber. And at the same time use the circle airstream to remove the dust. The flue gas can stay in the combustion chamber more than for 2 seconds, so the combustible substances in flammable gas and flying ashes can be burn down completely. There are dry exhaust purification equipment fixed on the incinerator's upside, which supply the adsorption treatment of Hydrogen Chloride and Sulfur Oxides. And Ozone in the flue gas is decomposed under the high temperature. On the purpose of getting rid of the acidic gas and purifying the exhaust gas, flue gas purification system have filtration brick of Ca(OH)2, which react with acidic gas.
| The incinerator's parameter: |
| Model |
LDF-30 |
LDF-50 |
LDF-150 |
LDF-300 |
LDF-500 |
| Burning Capacity |
20-30kg/time (3-6 times/day) |
30-50kg/time (3-6times/day) |
100-150kg/time (3-6times/day) |
200-300kg/time (3-6times/day) |
300-500kg/time(3-6times/day) |
| Incinerator Size m (L*H*B) |
1.45*0.9*1.75 |
1.8*1.15*3 |
2*1.4*3.5 |
2.2*1.4*3.8 |
3*2*4.8 |
| Imputing Mouth Width (mm) |
480*600 |
620*800 |
760*960 |
900*1100 |
1080*1280 |
| Chimney External Diameter (mm) |
280 |
280 |
300 |
400 |
460 |
|
| Draught Fan |
0.37kw |
0.37kw |
0.5kw |
1.1kw |
1.1kw/0.55kw |
| Combustion Improver Device |
0.11kw |
0.11kw |
0.11kw |
0.22kw |
0.22kw |
| Oil consumption: 4-6kg/h |
Oil consumption: 4-10kg/h |
Oil consumption: 4-10kg/h |
Oil consumption: 7-14kg/h |
Oil consumption: 7-14kg/h |
| Re-Burning Device |
0.11 kw |
0.11kw |
0.22kw |
0.37kw |
0.37kw |
| Oil consumption 4-6 kg/h |
Oil consumption: 4-10kg/h |
Oil consumption: 7-14kg/h |
Oil consumption: 10-20kg/h |
Oil consumption: 15-26kg/h |
| Voltage |
380v/220v |
380v/220v |
380v/220v |
380v/220v |
380v/220v |
| Weight(kg) |
2300 |
4000 |
7000 |
8000 |
13000 |
Q: How to buy your product?
A: You can provide us the waste kind and waste quantity(connect us for more details). we will recommend you the suitable product.
Q: How to pay?
A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT.
Q: What is the delivery time?
A: It depends on order quantities. Generally speaking, the delivery time will be within 3 to 4 weeks.
Q: How to install after the equipments arriving destination?
A: We will provide detailed illustrations to you. And we will send a technician to guide for installation and debugging. After
debugging equipment, he will teach your workers how to use it and how to maintain it.
Q: How to visit your factory?
A: You could fly to Qingdao airport and we will pick up you to our company.
1.Q:Are you a factory or trading company?
A: We are a factory, we have rich experience for manufacturing water processing equipment for more than 10 years.
2.Q:Where is your factory located? How can i visit there?
A: Our factory is located in No.1137, Zhucheng city, Shandong Province, China. It is about 2 hours from Qingdao airport. We can
pick you up if you need, welcome to visit our factory.
3.Q: Do you have minimum order quantity request?
A: No minimum order, but it can get a discount if you order a large quantity.
4.Q: Do you have certificates?
A: Yes, we have ISO,SGS certificate.
5.Q: Can you meet my special requirements for my products?
A: Yes, we have a professional design team. We can provide drawings according to your requirements.
6. Q: How to buy your idea products?
A: You can provide us your water sources, water quality, flow rate and ground area (contact us for more details).
7. Q: How to pay?
A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT.
8. Q: What is the delivery time?
A: It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.
9. Q: How to pack the products?
A: We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.
10. Q: How to keep your equipment from corrosion?
A: We use the world-famous paint, like SigmaCoatings, PainBow,etc. What's more, we paint strictly according to the standard process.
11. Q: How do you manufacture your equipment?
A: Our machining technology includes laser/plasma cutting, automatic welding, CNC cutting and bending.
12. Q: How to install after the equipment arriving destination?
A: We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee, air tickets, accommodation, wages will be paid by buyers.
){kind=link}