Product introduction
This is a kind of machine that combines MBR membrane separation technology with biological treatment technology and intelligent control technology.It features compact design,aesthetic appearance,small area,low cost,reliable operation,high automation as well as simple maintenance while discards defects in traditional sewage treatment technology.Secondary sedimentation tank was replaced and reclaimed water can be obtined through effective soild-liquid separation.It also boasts high concentrated microbial biomass in biological tank ,less excess sludge,effective removal of ammonia nitrogen,near zero suspended substance in the effluent and turbidity ,elimination of dacteria and virus to a great extend and effluent quality is much better than reclaimed water quality (exceeds national first level standard)
*Specifications we produce are as follows:5t/d,25t/d,50t/d,100t/d,150t/d,200t/d,300t/d,500t/d(manufacture according to client's requirement)
Advantages
MBR is kind of new technology for waste treatment by combining membrane separation technique with activated sludge method.It can be used for municipal sewage and industrial waste water treatment and substitute for secondary sedimentation tank in removing suspended particles,so as to increase nitrogen removal rate and organics degradation rate.As a waste water treatment system features simple operation,high automation and modular design.
1.Save 50% occupying area compared with traditional system.
2.Relative high MLSS value(<15g/L)and long residue time for sludge(<60 days).
3.Stable producing water quality for different inlet water.
4.Less sludge residue reduces cost for sludge treatment.
5.Low energy consumption ,simple and low operation cost.
Technical Parameter
| Model |
Size L*W(mm) |
MBR area(m2) |
Water amount(m2) |
Water tubidity(NTU) |
Ss(mg/1) |
| MBR-8 |
810*525 |
8 |
1.0-1.2 |
<1 |
<10 |
| MBR-10 |
1050*525 |
10 |
1.2-1.5 |
<1 |
<10 |
| MBR-16 |
1050*535 |
16 |
2.0-2.5 |
<1 |
<10 |
| Test condition:1.Running pressure:-0.03Mpa 2.MBR flux:6-8L(m2/h) |
| Model |
WSZ |
| Capacity |
0.5 |
1 |
3 |
5 |
10 |
20 |
30 |
| Air blower |
Model |
HB-0.75 |
HB-1.1 |
HB-2.2 |
HB-4.4 |
HB-8.8 |
HB-11.5 |
| Power(kw) |
0.75 |
1.1 |
1.2 |
4.4 |
4.4*2 |
11.5 |
| Pump |
Model |
40QW7-10-0.75 |
40QW10-7-0.75 |
50QW10-10-1.1 |
50QW25-7-1.5 |
50QW42-9-2.2 |
| Power(kw) |
0.75-1.1 |
1.5 |
2.2 |
| Inlet waterBOD5mg/L |
150-400 |
| Outlet waterBOD5mg/L |
20-60 |
| Floor space |
4.5 |
6.5 |
12 |
15 |
35 |
51 |
76 |
Application
(1) Hotel, restaurant, sanatorium, hospital, school;
(2) Residence community, villa district, village, town;
(3) Station, airport, seaport and dock;
(4) Factory, mine, army, beauty spot;
(5) All kinds of industrial sewage similar to the living sewage, etc.
FAQ
1.Q:Are you a factory or trading company?
A: We are a factory, we have rich experience for manufacuring water processing equipment for more than 10 years.
2.Q:Where is your factory located? How can i visit there?
A: Our factory is located in No.1137 Guanhai road , Zhucheng City, Shandong Province, China. It is about 2 hours from qingdao airport. We can pick you up if you need, welcome to visit our factory.
3.Q: Do you have minimum order quantity request?
A: No minimum order, but it can get a discount if you order a large quantity.
4.Q: Do you have certificates?
A: Yes, we have ISO,SGS certificate.
5.Q: Can you meet my special requirements for my products?
A: Yes, we have a professional design team. We can provide drawings according to your requirements.
6. Q:How to buy your idea products?
A:You can provide us your water sources, water quality, flow rate and ground area (connect us for more details).
7. Q:How to pay?
A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT.
8. Q:What is the delivery time?
A: It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.
9. Q: How to pack the products?
A: We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.
10. Q: How to keep your equipments from corrosion?
A: We use the world-famous paint, like SigmaCoatings,PainBow,etc. What's more, we paint strictly according to the standard process.
11. Q: How do you manufacture your equipment ?
A:Our machining technology includes laser/plasma cutting, automatic welding,CNC cutting and bending.
12. Q:How to install after the equipments arriving destination?
A: We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee, air tickets, accommodation, wages will be paid by buyers.
){kind=link}