1.Description
This machine is developed on the basis of operational experience of sewage treating device at home and broad with advanced biological treating method.It can remove BOD5,COD, NH3-N with stable performance and effective treating capacity,characteristics of auto-run and non-floor occupation saves cost and enjoys easy maintenance.Grass and flowers can be planted on the surface so the environment won't be affected.Water quality design parameters of wastewater is calculating according to the water quality of domestic sewage,this equipment has a significant treatment effect on the BOD, COD, ammonia and other organic pollutants.
2.Main Features
1.The device can be buried below the earth's surface. The surface can be used as green land or square land. Therefore, the device covers no surface area. And there is no need for plant construction, neither heating and heat preservation.
2. The device use plug flow biological contact oxidation pond, the effect is better. Besides, it is smaller than active sludge pool. The applicability to the water is stronger, impact resistance performance is good, discharging water is stable, there is no sludge expansion. In addition, the new elastomeric stereoscopic materials in the oxidation pond have a higher removing rate, and also can improve the water solubility of oxygen.
3. Because of the low volume load of fillings in AO bio-treatment technology of the device, and microbes are in the stage of oxygen, it would produce less mud. Generally only 90 days for one sludge removal.
4. Except for the conventional air exhaust, the device is equipped with soil deodorization measure as well.
5. The device is equipped with fully automatic electric control system and equipment damage alarm system. The device has a good reliability, generally, there is no need for special management, a monthly or quarterly maintenance is ok.
3. Application
1. Hotels, restaurants, nursing homes, hospitals.
2. Residential areas, private housing, holiday park.
3. Stations, airports, port terminals and ship.
4. Factories, mines, military, tourist, scenic.
5. And kinds of industrial wastewater similar with domestic wastewater.
4.Technical Parameter
| Model |
WSZ |
| Capacity(m³/h) |
0.5 |
1 |
3 |
5 |
10 |
20 |
30 |
| Air blower |
Model |
HB-0.75 |
HB-1.1 |
HB-2.2 |
HB-4.4 |
HB-8.8 |
HB-11.5 |
| Power(KW) |
0.75 |
1.1 |
1.2 |
4.4 |
4.4×2 |
11.5 |
| Pump |
Model |
40QW7-10-0.75 |
40QW10-7-0.75 |
50QW10-10-1.1 |
50QW25-7-1.5 |
50QW42-9-2.2 |
| Power(KW) |
0.75-1.1 |
1.5 |
2.2 |
Inlet Water |
BOD5mg/L |
150-400 |
| Outlet Water |
BOD5mg/L |
20-60 |
Floor space(m2) |
4.5 |
6.5 |
12 |
15 |
35 |
51 |
76 |
*Remark:
Our company can be based on the actual water quantity, water quality situation and the site of the non-standard design.
FAQ:
1.Q:Are you a factory or trading company.
A:We are a factory ,we have rich experience for manufacuring water processing equipment for more than 10 years.
2.Q:Where is your factory located? How can I visit there?
A:Our factory is located in No.1137,Zhucheng city ,Shandong Province, China .It is about 2 hours from Qingdao airport, Qingdao train station and Wei fang train station. We can pick you up if you need ,welcome to visit our factory.
3.Q:Do you have minimum order quantity request?
A:No minimum order, but it can get a discount if you order a large quantity.
4.Q:Do you have certificates?
A:Yes,we have ISO,SGS certificate.
5.Q:Can you meet my special require mwnts for my products?
A:Yes,we have a professional design team.We can provide drawings according to your requirements.
6.Q:How to buy your idea products?
A:You can provide us your water or waste sources,water or waste quality,flow rate and ground area (connect us for more details) .
7.Q:How to pay?
A:TT and L/C are acceptable and TT will be more appreciated 30% deposit before producing,70% balance before loading by TT.
8.Q:What is the delivery time ?
A: It depends on order quantitles .Generally speaking ,the delivery time will be within 4 to 6 weeks.
9.Q:How to pack the products?
A:We use standard package .If you have special package requirements ,we will pack as required ,but the fees will be paid by customers.
10.Q:How to keep your equipments from corrosion?
A:We use the world-famous paint ,like Sigma Coatings ,Pain ,Bow, etc. What's more ,we paint strictly according to the standard process.
11.Q:How do you manufacture your equipment?
A:Our machining technology includes laser 1 plasma cutting ,automatic welding, CNC cutting and bending.
12.Q:How to install after the equipments arriving destination?
A:We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee ,air tickets ,accommodation, wages willl be paid by buyers.
){kind=link}